The PS2-100 pumps are a small 100W system designed to fit into low cost mass market systems. This ready to use product provides a solution that is very easy to install even by a non-professional ( no wiring, cable splicing or special connections required! ). The kit includes the controller, pump, motor connector cable and MC4 cable adapter. The PS2-100 system provides over 20,000 litres of water per day and pumps up to 40 metres high. Due to the fact that it is a submersible pump it can be used in various contexts such as wells, ponds, rivers, lakes or cisterns. Common applications include water management for livestock, irrigation, gardens... Direct connection to the photovoltaic without the use of batteries. This makes the system less expensive, more reliable and requires less maintenance.
Technical features:
Pump length: 455 mm
Pump diameter: 88 mm
Pump weight: 5.5 Kg
Controller height: 29mm
Controller length: 115mm
Cable length: 15m
Controller depth: 122mm
Weight of the roller: 700 g
Pump material: stainless steel, stainless steel
Controller material: aluminum, resin
Controller power: 0.15 kW
Controller voltage : 50V
Vmp** optimal controller : >34 V
Controller motor current : 6.0A
Controller efficiency: 98%
Controller protection level: IP68
Rated pump power: 0.15 kW
Pump efficiency: 83%
Pump motor speed: 700-2,500 rpm
Pump insulation class: F
Pump protection level: IP68
Pump immersion: max 50 cm
m 3of water per day: 28 m 3
Pump vertical distance: 17m
Included in the kit:
controller with connections for photovoltaic modules, pump, dry run protection and float switch for full tank
engine with its socket
helical rotor pump
motor cable with plug
Bracket for mounting the controller under the photovoltaic module
12V inline water pump. Pump that is installed outside the tank or as a support for a submersible pump. In combination with our photovoltaic kit, it is possible to create a simple irrigation system in any place not served by an electrical system....
Submersible pump without non-return valve, high pressure 1.8 Bar large flow 22 litres per minute. This pump is part of the Power Jet series from REICH. Power 70W. Works vertically. Due to its high pressure, quiet operation and self-cooling of the...
COMET EXPANSION VESSEL Maximum pressure 3 bar at 20°. For continuous water flow in pressurized systems, installed between the pump and the tap. It is also essential to be able to use gas or electric heaters and must be installed between the pump...
Submersible water pump suitable for Hymer campers. REICH TWIN model 19 l/min with integrated non-return valve. A special feature of this submersible pump , developed by Reich , is that it has two pumps . Together they provide high flow and...
SHURFLO PUMP 2095-204-413 TRAIL KING 7 It is a self-priming pump that allows you to connect multiple delivery points. It can also run dry without damage. Built-in check valve. Excellent for use in campers, boats or as an autoclave in systems...
Kit consisting of a 12V submersible water pump and a 30W 230V / 12Vdc waterproof power supply. The pump is immersed directly into the tank and can be used for various purposes: To create a sink using tanks, where a water loading/unloading point is...
Shurflo® pump filter with threaded female and direct male connection for tube connection. To be installed directly into the pump with threaded connection for hose holder. Useful in campers, boats and caravans, to preserve the pump. Thanks to this...
19 l/min submersible water pump operating at 12V d, COMET model LUX PLUS MADE IN GERMANY. Thanks to its high power it is suitable as a bilge pump. It has a maximum head of 8.5 metres. In combination with our photovoltaic kit, it is possible to...
Kit consisting of a SHURFLO 2095-204-413 TRAIL KING 7 PUMP with fittings, Shurflo filter and Flame A20 Expansion Vessel. The 12V self-priming pump allows you to connect multiple delivery points, it has three independent pumping chambers to bring...
12V Water Pump Switch + 12V Light Switch. This socket can be combined with CBE frames. TECHNICAL INFORMATION CBE MCPL Model No. 1 Double single-pole switch 12V Color Grey RAL7015
PS2-100 HR-14 pump KIT ( photovoltaic panels excluded ) The PS2-100 pumps are a small 100W system designed to fit into low cost mass market systems. This ready to use product provides a solution that is very easy to install even by a...
SHURFLO PUMP 2095-403-443 10.6 L/min 12V 45PSI It is a self-priming pump that allows you to connect multiple delivery points. It switches on automatically as soon as the pressure inside the pipes drops, due to the opening of a tap. It can also run...
REICH FILTER FOR IMMERSION PUMPS Filter that prevents foreign bodies from entering the interior of the submersible pumps. Standard spare part for Reich pumps TECHNICAL INFORMATION Diameter: 30mm Only for Reich submersible pumps
12V inline water pump. Pump that is installed outside the tank or as a support for a submersible pump. In combination with our photovoltaic kit, it is possible to create a simple irrigation system in any place not served by an electrical system....
Submersible pump without non-return valve, high pressure 1.8 Bar large flow 22 litres per minute. This pump is part of the Power Jet series from REICH. Power 70W. Works vertically. Due to its high pressure, quiet operation and self-cooling of the...
COMET EXPANSION VESSEL Maximum pressure 3 bar at 20°. For continuous water flow in pressurized systems, installed between the pump and the tap. It is also essential to be able to use gas or electric heaters and must be installed between the pump...
Submersible water pump suitable for Hymer campers. REICH TWIN model 19 l/min with integrated non-return valve. A special feature of this submersible pump , developed by Reich , is that it has two pumps . Together they provide high flow and...
SHURFLO PUMP 2095-204-413 TRAIL KING 7 It is a self-priming pump that allows you to connect multiple delivery points. It can also run dry without damage. Built-in check valve. Excellent for use in campers, boats or as an autoclave in systems...
