AC26 and Sanigen Limescale Remover for Pipes, Tanks, Camper Plumbing System
The first product created specifically for campers and pleasure boaters. It removes limescale from the tank, pipes, boiler and all fittings without damaging gaskets, o-rings, pipes and tanks.
No more scale in your camper or boat's system!
The package contains two sachets to be diluted each with 25 liters of water to eliminate limescale from the water tank, pipes, and fittings. And a sachet of SANIGEN to further clean the water system by eliminating biofilm, slime and small scale from the walls of the pipes and tank.
Usage: Dissolve the contents of each of the two sachets in 5 litres of water and pour into the tank. Then add 25 litres of water to the tank if you use 1 sachet or 50 litres of water if you use both sachets
Make sure the water covers all the limescale build-up; fill all the pipes and let it sit for 24/48 hours.
After use, the product must be rinsed well and then sanitized with SANIGEN.
INSTRUCTIONS Dissolve the contents of 1 or 2 sachets in 5 litres of water and pour them into the tank, add 25 or 50 litres of water. Check that the water covers the limescale formations. If you need to add water, you will need to add 25 litres and the contents of another sachet. Fill all the pipes, both the hot and cold line, (boiler off) by opening the taps of all the utilities one by one until there is no more air in the pipes. Leave the product to rest in the pipes and in the tank for 24/48 hours: The product does not damage gaskets and O-rings. Drain the water from the tank from the taps of all the utilities, one at a time: the water pressure and the forced flow will eliminate the dissolved limescale from the pipes. Fill with drinking water and rinse all the pipes.
Even generously 2/3 times after using AC26. Also perform the treatment with SANIGEN to eliminate residues and biofilm
Technical specifications
The package contains 2 sachets of the product and a sachet of SANIGEN.
TIPS FOR USE
SANITIZE DRINKING WATER IN CAMPER OR BOAT
Insert 1 ml of BIOCHLOR product into the tank for every 10 litres of water using the special dispenser provided.
supplied in the package. The water is kept bacteriologically clean for 48/96 hours. If
load water of dubious origin, calculate 48 hours for bacteriological coverage, with ?safe? water 96 hours. During the 96 hours, you can top up the water, provided that this
be at most 30 or 40 percent, otherwise it is advisable to add another 1 ml of BIOCHLOR for every 10 liters of water. At the end of using the camper or boat, it is always advisable to completely empty the tanks, when this is possible, leaving all the taps open, to allow the air to dry the pipes.
BIOCHLOR has an expiry date of 24 months from the date of packaging.
REPLACEMENT CAP FOR FAP WATER LOADING NOZZLE Filling nozzles are essential for filling tanks with clean water. Attention: this replacement cap is only compatible with the FAP water filler neck.
Polyethylene food tanks, with recessed inspection cap ø 140 mm. Average wall thickness 4 mm. Our tanks are individually tested. Supplied without fittings. All our tanks can be supplied with food certification. Tanks of different sizes and in black...
Articulated support bracket for shower head. Useful in camper caravans and at home. Made of plastic material. TECHNICAL INFORMATION Material: plastic Color: Chrome Maximum dimensions: diam. 6.5cm by depth 10cm
WHITE SHORT WATER LOADING NOZZLE FOR CAMPER FOR 35mm WATER Short water nozzle. The connection provided for the tank is ø 35 mm. It also has an air vent connection. Compatible with ZADI three-spoke caps. PACKAGE CONTENTS Color: White Ø 35 with vent...
12V 24V Submersible Pump Foot Switch. Useful for activating water pumps in campers or when creating a sink not connected to the water mains. It allows for significant water savings by enabling the pump only for the necessary time. Thanks to this...
KIT for fixing tanks Camper Van Tensioning tape 450cm Suitable for fixing water tanks. The KIT includes all parts needed for assembly, including instructions. The tension band is made of steel and has a hard plastic coating that protects the steel...
THETFORD TOILET PUMP COMPATIBLE C250 Cassette toilet pump C250 .12 Volt, 10ltr/min, 50 Watt, 1.5bar. The set contains a 10 litre pump, a plastic stand, a 5A fuse and heat shrink tubing. TECHNICAL DATA Line: Thetford C250 Item number : 2400950H...
EXPANSION CAP FOR HOLES D 23 MM Lever expansion plug for exhaust bushings with 23 mm hole. This exhaust plug is made entirely of plastic material, lightweight, functional, robust, non-oxidizable. With screw adjustment TECHNICAL INFORMATION...
Built-in external shower kit complete with TREM mixer, 2.5 m flexible hose, shower with button and built-in box. Convenient to avoid bringing sand into the camper and as a source of water within easy reach outside the camper. PACKAGE CONTENTS 2.5m...
The TREM single-lever mixer replacement , modern and elegant, offers a good price /performance ratio . The use of high quality materials for the TREM camper mixer guarantees a long life . This mixer is a replacement for the external boxes of the...
MIXER FOR CAMPER CARAVAN WITHOUT SWITCH FOLDABLE Practical and economical mixer without microswitch with foldable spout, resistant to hot water up to 80 °C. Suitable for pumps with pressure switch or foot switch. It can be used in kitchens and...
REICH MIXER TAP WITH SWITCH - TWIST MODEL CHROME Mixer taps with ceramic cartridge, curved spout. TECHNICAL INFORMATION Brand: Reich Model: Twist Chrome with switch Length: 120 mm Folded height: 40 mm Weight: 230 gr Campers: Hymer, Hobby, Adria...
REPLACEMENT CAP FOR FAP WATER LOADING NOZZLE Filling nozzles are essential for filling tanks with clean water. Attention: this replacement cap is only compatible with the FAP water filler neck.
Polyethylene food tanks, with recessed inspection cap ø 140 mm. Average wall thickness 4 mm. Our tanks are individually tested. Supplied without fittings. All our tanks can be supplied with food certification. Tanks of different sizes and in black...
Articulated support bracket for shower head. Useful in camper caravans and at home. Made of plastic material. TECHNICAL INFORMATION Material: plastic Color: Chrome Maximum dimensions: diam. 6.5cm by depth 10cm
WHITE SHORT WATER LOADING NOZZLE FOR CAMPER FOR 35mm WATER Short water nozzle. The connection provided for the tank is ø 35 mm. It also has an air vent connection. Compatible with ZADI three-spoke caps. PACKAGE CONTENTS Color: White Ø 35 with vent...
12V 24V Submersible Pump Foot Switch. Useful for activating water pumps in campers or when creating a sink not connected to the water mains. It allows for significant water savings by enabling the pump only for the necessary time. Thanks to this...
KIT for fixing tanks Camper Van Tensioning tape 450cm Suitable for fixing water tanks. The KIT includes all parts needed for assembly, including instructions. The tension band is made of steel and has a hard plastic coating that protects the steel...
THETFORD TOILET PUMP COMPATIBLE C250 Cassette toilet pump C250 .12 Volt, 10ltr/min, 50 Watt, 1.5bar. The set contains a 10 litre pump, a plastic stand, a 5A fuse and heat shrink tubing. TECHNICAL DATA Line: Thetford C250 Item number : 2400950H...
