MPPT charge controller with display EPSOLAR TRACER 3215AN 30A uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Thanks to this function, the output current is higher than that produced directly by the photovoltaic panel. For example, the current from the panel may be 8A but the output current to the battery may reach 10A. In practice, the regulator exploits the voltage jump that is normally present between the photovoltaic panel (17/18V) and the battery (13/14V), transforming it into current. It can work in 12V systems for a maximum panel power of 390W and in 24V systems for a maximum panel power of 780W, managing a total current of 30A. The TRACER MPPT accepts a maximum voltage from the panels of 100V. In this way, it is also possible to connect energy account panels in 12Vdc or 24Vdc systems. It will therefore be possible to use panels that are not compatible with traditional charge regulators in systems for campers, cabins or boats.
CHARACTERISTICS
Automatic recognition of 12/24V system voltage
Automatic MPPT function (Advance maximum power point tracking)
Automatic day/night recognition
The DUAL TIMER function allows you to program the number of hours a load (e.g. lamps) is switched on, after sunset and before sunrise.
Possibility of using sealed lead batteries (including AGM), gel batteries and non-sealed lead batteries
Uses temperature compensation to correct charge and discharge parameters, improving battery life
Electronic protection against overload, short circuit, overvoltage and reverse polarity of the panel and battery
LVD function protects the battery from deep discharge
RS485 interface for connecting the MT-50 Remote Display (optional)
Terminals for 10mmq cable.
TECHNICAL INFORMATION
Rated voltage: 12VDC/ 24VDC
Maximum battery current: 30A
Maximum load output current: 30A
Maximum battery voltage: 32V
Maximum Input Voltage: 150Vdc
Maximum input power: 390W 12V system / 780W 24V system
Self-consumption: ?12mA
RS485 connector: 5VDC/100mA
Grounding: Common negative.
Night detection threshold: 5V (12V system) 10V (24V system)
Day detection threshold: 6V (12V system) 12V (24V system)
Ambient Temperature Range: -35°C to +55°C
Temperature compensation coefficient: -30mV/?/12V(25? ref)
IP Class: IP30 (indoor use)
Dimensions: 228x164x55 mm
Mounting hole spacing: 170x155mm 4 slots 5x7mm
Terminals: 16mmq
Weight: 1.26kg
This charge controller can be combined with the EPsolar MT50 display, to be able to view the voltage and current data of the panel, battery and load in a more convenient place than where the regulator can be installed.
ATTENTION ! THIS PRODUCT IS ONLY COMPATIBLE WITH THE 12V MFB90 PHOTOVOLTAIC MODULE The PB90 regulator is designed and built for the MFB90 12V photovoltaic module. It is designed with MPPT technology that adapts the regulator to the maximum...
MPPT SOLAR REGULATOR 10A Bluetooth Waterproof IP67 Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all...
CBE PT742 Touch Display for PRS300 and PRM350 Solar Camper Charge Controller DIGITAL TOUCH TEST PANEL with OLED display for checking the battery voltage and the current supplied by the photovoltaic module, complete with 1.5m cable, spacer for...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
SOLAR REGULATOR LCD PWM 20A PWM Smart Pulse solar controllers enable the safe operation of small power solar panels (up to 130W). They effectively protect batteries from overvoltage, deep discharge, short circuits, voltage spikes and sulfation....
The CMM remote display connected to the Phocos CA CML and CMLNL series charge controllers allows you to view: Current produced by the photovoltaic panel Battery voltage Current absorbed by the load (e.g. light bulbs) The display shows the values...
VECHLINE CHARGE REGULATORS - PWM 10A 12/24 V Intelligent charge controller with automatic switch 12/24V. User-friendly LCD screen. PWM technology to ensure optimal charging by increasing battery life. Four working modes available. Suitable for...
The PRM350 solar regulator is able to charge lead batteries (liquid, gel and AGM) and 12V lithium batteries automatically by controlling and limiting the energy supplied by the connected photovoltaic modules. It has an MPPT (Maximum Power Point...
CBE PRS350 Charge regulator for camper photovoltaic panel The PRS350 solar regulator is suitable for operation with 12V photovoltaic modules. Designed and manufactured with innovative electronic techniques, it is characterized by high electrical...
RS485-USB ADAPTER FOR EPEVER EPSOLAR CHARGE REGULATOR OR INVERTER With the appropriate monitoring software for the controller, you can, for example, track and graphically record solar power, battery voltage and load power in real time and change...
TEMPERATURE SENSOR FOR EPEVER EPSOLAR CHARGE CONTROLLER The temperature sensor is connected to the charge controller and applied to the battery. This allows the sensor to transmit the exact temperature of the battery to the charge controller. This...
CBE PRS300 charge regulator kit with CBE PT642 display. THE PRS300 PHOTOVOLTAIC MODULE REGULATOR is designed and built with innovative electronic techniques that allow maximum performance of the photovoltaic modules connected to it. The regulator...
EZA SOLAR MPPT 15A SOLAR REGULATOR Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all difficult...
New EPEVER GoMate GM3024N 12/24V - 30A charge controller. It is possible to set the type of battery used (GEL, lead, AGM). Technical Information Model: Epever GoMate GM3024N
Battery input voltage range: 8V-32V
Rated current: 30A...
ATTENTION ! THIS PRODUCT IS ONLY COMPATIBLE WITH THE 12V MFB90 PHOTOVOLTAIC MODULE The PB90 regulator is designed and built for the MFB90 12V photovoltaic module. It is designed with MPPT technology that adapts the regulator to the maximum...
MPPT SOLAR REGULATOR 10A Bluetooth Waterproof IP67 Get the most out of your solar system with automatic maximum power point adjustment. Battery charge status consideration. LED operation indicators. Watertight product, therefore usable in all...
CBE PT742 Touch Display for PRS300 and PRM350 Solar Camper Charge Controller DIGITAL TOUCH TEST PANEL with OLED display for checking the battery voltage and the current supplied by the photovoltaic module, complete with 1.5m cable, spacer for...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
SOLAR REGULATOR LCD PWM 20A PWM Smart Pulse solar controllers enable the safe operation of small power solar panels (up to 130W). They effectively protect batteries from overvoltage, deep discharge, short circuits, voltage spikes and sulfation....
The CMM remote display connected to the Phocos CA CML and CMLNL series charge controllers allows you to view: Current produced by the photovoltaic panel Battery voltage Current absorbed by the load (e.g. light bulbs) The display shows the values...
VECHLINE CHARGE REGULATORS - PWM 10A 12/24 V Intelligent charge controller with automatic switch 12/24V. User-friendly LCD screen. PWM technology to ensure optimal charging by increasing battery life. Four working modes available. Suitable for...
The large porthole 50x50 cm porthole with pantograph opening, opening on four sides with comfortable handles. Blind and roller mosquito net are supplied as standard. The outer layer of the blind is made of aluminum to reflect heat, the inside is...
Anti-theft model "ON-OFF" battery disconnect terminal. By turning the knob, the electrical contact is disconnected on the + pole. Removing the knob provides an effective anti-theft action. Excellent as a simple anti-theft device for cars, trucks,...
2-way cable passage kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. This new roof hatch has a groove on the...
Slim series transformer power supply from 220Vac to 12Vdc with stainless steel body. Excellent for powering LED strips or LED lamps. Built with switching technology that allows to reduce, in addition to weight and size, consumption compared to...
5 meter cold light LED strip reel. It works at 12Vdc and can therefore be installed directly on cars, campers and boats. With the addition of a 12Vdc power supply, it can be installed in homes and commercial premises. With the high degree of...
CHIMNEY FOR CAMPER HOOD Plastic chimney for hood, complete with ring and gasket. Hole Ø 60 mm. Made in Italy TECHNICAL INFORMATION Material: plastic Color: white Hole diameter: 60mm
230V 20A exchange relay useful for managing the 220V network on board the camper or caravan or in photovoltaic systems. With this product you can manage the voltage exchange between the grid and the generator or between the grid and the inverter...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
The large porthole 50x50 cm porthole with pantograph opening, opening on four sides with comfortable handles. Blind and roller mosquito net are supplied as standard. The outer layer of the blind is made of aluminum to reflect heat, the inside is...
Anti-theft model "ON-OFF" battery disconnect terminal. By turning the knob, the electrical contact is disconnected on the + pole. Removing the knob provides an effective anti-theft action. Excellent as a simple anti-theft device for cars, trucks,...
2-way cable passage kit, for passing cables of solar panels, cameras, antennas, etc., from the roof of the camper, caravan or boat. A safe passage for your cables without the risk of water infiltration. This new roof hatch has a groove on the...
Slim series transformer power supply from 220Vac to 12Vdc with stainless steel body. Excellent for powering LED strips or LED lamps. Built with switching technology that allows to reduce, in addition to weight and size, consumption compared to...
5 meter cold light LED strip reel. It works at 12Vdc and can therefore be installed directly on cars, campers and boats. With the addition of a 12Vdc power supply, it can be installed in homes and commercial premises. With the high degree of...
CHIMNEY FOR CAMPER HOOD Plastic chimney for hood, complete with ring and gasket. Hole Ø 60 mm. Made in Italy TECHNICAL INFORMATION Material: plastic Color: white Hole diameter: 60mm
230V 20A exchange relay useful for managing the 220V network on board the camper or caravan or in photovoltaic systems. With this product you can manage the voltage exchange between the grid and the generator or between the grid and the inverter...
EPSOLAR TRACER 2210AN 20A MPPT charge controller uses the latest technology for these devices. This is the MPPT function that ensures 30% higher efficiency compared to traditional charge regulators. Equipped with built-in multi-function LCD...
